Ukuveliswa kunye neFektri yeMveliso yeGlasi yokuZigquma ngokuzenzekelayo yaseTshayina i-IGL-2508E

Umfanekiso oPhambili woMgca weMveliso yeGlasi yokuGcina iGlasi ye-IGL-2508E

Umgca Wokuvelisa Iglasi Yokugquma Ngokuzenzekelayo ye-IGL-2508E

Inkcazo emfutshane:

Iimpawu kunye nemisebenzi:

1.Umgca wemveliso oquka icandelo lokulayisha iglasi, icandelo lokuhlamba nokomisa, icandelo lokuthutha iglasi, icandelo lokuhlola kunye ne-spacer assembly, icandelo lokuhlanganisa iglasi, icandelo lokushicilela ipleyiti, icandelo lokukhupha kunye netafile yokuthambekela.

2. Yahlula ngokuzenzekelayo icala leglasi egqunywe ngeplastiki kunye neglasi engaphantsi kwe-E.

Thumela i-imeyile kuthi Khuphela njengePDF

Iinkcukacha zeMveliso

Iithegi zeMveliso

umgca-wokuvelisa iglasi yokwambathisa

Iimpawu kunye nemisebenzi:

Umgca wemveliso oquka icandelo lokulayisha iglasi, icandelo lokuhlamba nokomisa, icandelo lokuthutha iglasi, icandelo lokuhlola kunye ne-spacer assembly, icandelo lokuhlanganisa iglasi, icandelo lokushicilela ipleyiti, icandelo lokukhupha kunye netafile yokuthambekela.
Ukwahlula ngokuzenzekelayo icala leglasi egqunyiweyo kunye neglasi engaphantsi kwe-E.
Isilawuli se-PLC esisebenza ngesikrini sokuchukumisa.
Yamkela indibano yeglasi engaphandle, enokuvelisa i-IGU esemgangathweni enemaleko ephindwe kabini kunye neyunithi yeglasi egqunyiweyo enamaleko amathathu.
Icandelo lokucinezela ipleyiti lisebenzisa izixhobo kunye netsheyini ehambelanayo kwaye liqhutywa sisikhululo se-hydraulic. Itafile yokucinezela ipleyiti ikwavuleka ukuze igcinwe isemgangathweni.
Umgca wonke wamkela i-frequency converter ukuze ulungise isantya, ukhuphe i-800 PCS ngotshintsho ngalunye.
Umatshini wokucinezela ipleyiti yangaphakathi awunyanzelekanga ukuba usetyenziswe kwimveliso ye-IGU yenyathelo.

Ipharamitha yobugcisa:

Ubungakanani beyunithi ye-IG ecutshungulweyo	Ubuncinci: 300x450mm, Ubuninzi: 2500x3000mm, 2500x3500mm (iyunithi ende, ongayikhetha)
Iindlela zokuhlanganisa	Indibano ezenzekelayo yangaphandle, i-press yepleyiti ngaphakathi
Amandla	I-3-Phase, iingcingo ezi-4, i-380V 50Hz, i-27kW
Ukusetyenziswa komoya	600L/ngomzuzu
Isantya sokuhlamba	2-8m/ngomzuzu
Isantya esiphezulu sokusebenza	45m/min (ingahlengahlengiswa ngokweemfuno)
Ubukhulu beglasi enye:	3-15 mm
Ubukhulu beyunithi yeglasi yokwambathisa	12 ~ 50mm;
Umoya ocinezelweyo	0.5-1.0Mpa, 0.8m³/umzuzu
Ukuqhuba umbane ngamanzi	≦50μS/cm
Ubushushu obugciniwe	10℃ -30℃, emva kwe-DIN 40040
Umswakama womoya othelekisekayo	≦75%, ilandela i-DIN 40040
Ubukhulu obupheleleyo	26050x2300x3400mm

Ngaphambili: IGL-2510E-SD Umgca wokuvelisa iglasi ozenzekelayo ogqunywe ngerobhothi yokutywina
Okulandelayo: IGL-2208E EzenzekelayoUmgca Wokuvelisa Iglasi Yokwambathisa

Ngaphambili: Uluhlu lwamaxabiso lwe-Double Glazing Sealant Extruder - Umatshini weG-VFE-9M othe nkqo othe nkqo weGlasi othe nkqo onama-flat edge – CBS

Okulandelayo: Umatshini wokuhlamba iglasi othe tyaba we-GWH-1600

Bhala umyalezo wakho apha uze uwuthumele kuthi