Injin Gefen Gilashin Tsaye Mai Madaidaiciya G-VFE-12A
Bayani
G-VFE Series na Gilashin Tsaye na Kofin Taya Mai Gefen Gilashin Niƙa & Na Goga Mai Zane & 45° Arris ko Sebu.
Injinan sun ƙunshi ƙarfe da aka haɗa da tayoyin kofin resin da lu'u-lu'u da kuma ƙafafun gogewa. Idan gilashi ya ratsa tsaye, gefunan ƙasan gilashi suna taɓa ƙafa kuma ana niƙa su da goge su. Ana samun kyawawan gefunan satin. Muna samar da samfura da yawa na gefunan kofin gilashi.
Manyan abubuwan da suka fi daukar hankali
1. Injin gogewa mai faɗi da gogewa mai faɗi guda 12 na G-VFE-12A
2. Tsarin jigilar bearing mai inganci
3. Tsarin aiki na HMI touch panel don shigar da sigogin aiki cikin sauri da sauƙi
4. Cikakken fasalin PLC
5. Kauri na gilashi da aka nuna an daidaita shi ta hanyar dijital ta hanyar mai shigar da lambar sirri tare da motar AC da PLC ke sarrafawa
6. Saurin tafiya na gilashi wanda aka tsara ta hanyar maɓalli tare da inverter mita
7. Gilashi mai nauyin har zuwa kilogiram 700
8. Duk ƙirar musamman ta injinan ABB spindles
9. Silinda masu numfashi don goge sandunan gogewa
10. A sarrafa gilashin da kauri kamar 30 mm (zaɓi ne 50 mm)
11. Tayoyin 10S guda ɗaya da CE3 guda biyu suna samun kyakkyawan ƙarewa mai haske yayin da ba sa rage saurin tafiyar gilashi.
12. Madaukai guda 6 masu faɗi da madaukai guda 6 masu ɗaurewa (kowannensu 3 don gaba da baya) (zaɓin madaukai guda 8 masu faɗi da madaukai guda 4 masu ɗaurewa (kowannensu 2 don gaba da baya)
Tsarin Tayoyi
| #12 | #11 | #10 | #9 | #8 | #7 | #6 | #5 | #4 | #3 | #2 | #1 | Matsayi | |
|
|
|
|
|
|
|
|
|
|
|
|
| ||
| Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Siffofin | |
| CE3 | CE3 | 10S40 | Lu'u-lu'u mai kama da resin | 10S40 | Lu'u-lu'u mai kama da resin | 10S40 | Lu'u-lu'u mai kama da resin | Lu'u-lu'u mai kama da resin | Lu'u-lu'u na ƙarfe | Lu'u-lu'u na ƙarfe | Lu'u-lu'u na ƙarfe | Kayan Aiki | |
| Gogewa Mai Faɗi a Faɗi | Gogewa Mai Faɗi a Faɗi | Gogewa Mai Faɗi a Faɗi | Flat Edge Nika Mai Kyau | Gyaran Arris na Baya | Rear Arris Fine Nika | Gyaran Gaba na Arris | Niƙa Mai Kyau a Gaban Arris | Flat Edge Nika Mai Kyau | Nika mai faɗi | Nika mai faɗi | Nika mai faɗi | Aikace-aikace | |
| Φ150 | Φ150 | Φ150 | Φ150 | Φ130 | Φ130 | Φ130 | Φ130 | Φ150 | Φ150 | Φ150 | Φ150 | Girman (mm) | OD |
| Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | ID | |
| NA | NA | NA | #320 | NA | #180 | NA | #180 | #240 | #240 | #180 | #100 | Gurasa | |
| AC 1.5 | AC 1.5 | AC 2.2 | AC 2.2 | AC 1.75 | AC 1.75 | AC 1.5 | AC 1.75 | AC 2.2 | AC 2.2 | AC 2.2 | AC 2.2 | Ƙarfin Motoci (kW) | |
| Ciwon huhu | Ciwon huhu | Ciwon huhu | Mech | Ciwon huhu | Mech | Ciwon huhu | Mech | Mech | Mech | Mech | Mech | Ciyar da Spindles | |
Bayani dalla-dalla
| Edgeworks | Lebur & Dinka |
| Jimlar Na'urar Dogayen Sanduna | 12 |
| Na'urar Siffar Gefen Ƙasa | 8 |
| Na'urar Siffar Zane ta Gaba | 2 |
| Na'urar Siffar Dinkin Baya | 2 |
| Tsarin Aiki na Mai Aiki na HMI Touch Panel | Ee |
| Kamfanin PLC | Eh, sarrafa goge sandunan gogewa & daidaita kauri gilashi, |
| Matsakaicin Nauyin Gilashi | 700 kg |
| Kauri Gilashi | 3 ~ 30 mm (zaɓi 40 mm) |
| Ƙaramin Girman Gilashi | 40 x 40 mm |
| Gudun Tafiya na Gilashi | 0.5 ~ 5.0 m/min. |
| Daidaita Gudun Tafiya na Gilashi | An tsara shi ta hanyar maɓalli tare da inverter mita |
| Daidaita Kauri na Gilashi | Shigarwa a cikin HMI wanda PLC ke sarrafawa yana sarrafa jigilar kaya ta gaba ta atomatik ta hanyar motar AC & encoder |
| Kushin Roba na Baya | Tauri |
| Adadin Cire Gilashi | Manual |
| Babban jigilar kaya | Bearings |
| Shigarwa/Mai fita | Belin Lokaci |
| Nika Spindles Ciyarwa | Injiniyanci |
| Goge Spindles Ciyarwa | Ciwon huhu |
| Tankin Ruwa | Ɗaya |
| Injin Famfon Ruwa | AC 0.25 KW |
| Iskar Matsawa | 8 MPa |
| Ƙarfi | 26.20 KW |
| Wutar lantarki | AC 380V / Mataki na 3 / 50Hz (wasu idan an buƙata) |
| Nauyi (kg) | 5500 kg |
| Girman waje | 8500(L) x 1200(W) x 2800(H) mm |
Nau'ikan samfura
-
Injin Gilashin Madaidaiciya Mai Tsaye na Gilashi Mai Zane
-
G-VFE-10A Tsaye Madaidaiciyar Layin Gilashi Beveling ...
-
GBF-4225 Gilashin Beveling Machine mai gefe huɗu
-
G-VFE-8M Tsaye Madaidaiciyar Layin Gilashi Beveling ...
-
Injin Beveling na Gilashi na gefe biyu na GBD-3025
-
A tsaye Madaidaiciyar Layin Gilashin Flat Bevelling Mac ...