Injin Gilashin Madaidaiciya Mai Tsaye na Gilashi Mai Zane
1. Injin G-VFE-4M mai faɗi da faɗi yana samar da flat & arris
2. Ƙofofin gilashin gilashin kuɗi masu ƙera da spindles guda 4
3. Niƙa mai faɗi ɗaya, goge gefen da aka yi da siminti da kuma dinkin 45° guda biyu
4. Matse roba mai kauri daban-daban da za a iya miƙewa da kuma riƙe shi da kauri daban-daban na gilashi
5. Ba sai an gyara na'urar jigilar kaya ta gaba ba yayin canza kauri na gilashi a wasu wurare
6. Ana iya daidaita saurin aiki na gilashi ta hanyar amfani da keken hannu tare da rage saurin gogayya akai-akai
7. Ameters suna duba yanayin aiki na ƙafafun
8. Ba a cika samun sarari sosai ba
9. Ya dace sosai ga ƙananan zuwa matsakaici masu girma dabam-dabam na gilashi
Tsarin Tayoyi
| #4 | #3 | #2 | #1 | Matsayi | |
 |  |  |  | ||
| Kofi | Kofi | Kofi | Kofi | Siffofin | |
| Gogewa Mai Faɗi a Faɗi | Niƙa Mai Kyau na Baya | Niƙa Mai Kyau a Gaba | Nika mai faɗi | Aikace-aikace | |
| 10S40 | Lu'u-lu'u mai kama da resin | Lu'u-lu'u mai kama da resin | Lu'u-lu'u na ƙarfe | Kayan Aiki | |
| Φ150 | Φ130 | Φ130 | Φ150 | Girman (mm) | OD |
| Φ50 | Φ50 | Φ50 | Φ50 | ID | |
| NA | #180 | #180 | #150 | Gurasa | |
| AC 1.5 | AC 1.5 | AC 1.5 | AC 2.2 | Ƙarfin Motoci (kW) | |
| Inji (Zaɓin iska na huhu) | Injiniyanci | Injiniyanci | Injiniyanci | Ciyar da Spindles | |
Bayani dalla-dalla
| Edgeworks | Lebur & Dinka |
| Jimlar Na'urar Dogayen Sanduna | 4 |
| Na'urar Siffar Gefen Ƙasa | 2 |
| Na'urar Siffar Zane ta Gaba | 1 |
| Na'urar Siffar Dinkin Baya | 1 |
| Tsarin Aiki na Mai Aiki na HMI Touch Panel | Babu |
| Kamfanin PLC | Babu |
| Matsakaicin Nauyin Gilashi | 200 kg |
| Kauri Gilashi | 3 ~ 25 mm |
| Ƙaramin Girman Gilashi | 100 * 100 mm |
| Gudun Tafiya na Gilashi | 0.5 ~ 4.0 m/min |
| Daidaita Gudun Tafiya na Gilashi | An tsara shi ta hanyar tayar hannu tare da rage saurin gogayya mai canzawa akai-akai |
| Daidaita Kauri na Gilashi | Kushin baya mai rami yana canzawa zuwa gilashin latsawa |
| Kushin Roba na Baya | M |
| Adadin Cire Gilashi | Manual |
| Babban jigilar kaya | Sarkoki |
| Shigarwa/Mai fita | Sarkoki |
| Nika Spindles Ciyarwa | Injiniyanci |
| Goge Spindles Ciyarwa | Injiniyanci |
| Tankin Ruwa | Ɗaya |
| Injin Famfon Ruwa | AC 0.25 KW |
| Iskar Matsawa | Babu |
| Ƙarfi | 11 KW |
| Wutar lantarki | AC 380V / Mataki na 3 / 50Hz (wasu idan an buƙata) |
| Nauyi (kg) | 2000 kg |
| Girman waje | 5800(L) x 1000(W) x 1800(H) mm |
Nau'ikan samfura
-
G-VFE-8M Tsaye Madaidaiciyar Layin Gilashi Beveling ...
-
A tsaye Madaidaiciyar Layin Gilashin Flat Bevelling Mac ...
-
Injin Beveling na Gilashi na gefe biyu na GBD-3025
-
G-VFE-5M Tsaye Madaidaiciyar Layin Gilashi Beveling ...
-
G-VFE-9M Tsaye Madaidaiciyar Layin Gilashi Mai Zane ...
-
Tsaye Madaidaiciyar Layin Gilashi Flat Gefen Injin ...