Injin Gilashin Gilashi Mai Tsaye na G-VFE-10A
1. Injin goge gilashi mai faɗi da gogewa guda 10
2. Tsarin jigilar kaya mai inganci mai kyau
3. Tsarin aiki na HMI touch panel don shigar da sigogin aiki cikin sauri da sauƙi
4. Cikakken fasalin PLC
5. Kauri na gilashi da aka nuna an daidaita shi ta hanyar dijital ta hanyar mai shigar da lambar sirri tare da motar AC da PLC ke sarrafawa
6. Saurin tafiya na gilashi wanda aka tsara ta hanyar maɓalli tare da inverter mita
7. Gilashi mai nauyin har zuwa kilogiram 700
8. Duk ƙirar musamman ta injinan ABB spindles
9. Silinda masu numfashi don goge sandunan gogewa
10. A sarrafa gilashin da kauri kamar 30 mm (zaɓi ne 50 mm)
Tsarin Tayoyi
| #10 | #9 | #8 | #7 | #6 | #5 | #4 | #3 | #2 | #1 | Matsayi | |
|
|
|
|
|
|
|
|  |
|
| ||
| Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Kofi | Siffofin | |
| CE3 | 10S40 | Lu'u-lu'u mai kama da resin | 10S40 | Lu'u-lu'u mai kama da resin | 10S40 | Lu'u-lu'u mai kama da resin | Lu'u-lu'u mai kama da resin | Lu'u-lu'u na ƙarfe | Lu'u-lu'u na ƙarfe | Kayan Aiki | |
| Gogewa Mai Faɗi a Faɗi | Gogewa Mai Faɗi a Faɗi | Flat Edge Nika Mai Kyau | Gogewar Dinki na Baya | Niƙa Mai Kyau na Baya | Gogewar Dinki na Gaba | Niƙa Mai Kyau a Gaba | Nika mai faɗi | Nika mai faɗi | Nika mai faɗi | Aikace-aikace | |
| Φ150 | Φ150 | Φ150 | Φ130 | Φ130 | Φ130 | Φ130 | Φ150 | Φ150 | Φ150 | Girman (mm) | OD |
| Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | Φ50 | ID | |
| NA | NA | NA | NA | #180 | NA | #180 | #240 | #240 | #100 | Gurasa | |
| AC 1.5 | AC 2.2 | AC 2.2 | AC 1.5 | AC 1.5 | AC 1.5 | AC 1.5 | AC 2.2 | AC 2.2 | AC 2.2 | Ƙarfin Motoci (kW) | |
| Inji (zaɓin iska na huhu) | Inji (Zaɓin iska na huhu) | Injiniyanci | Injiniyanci | Injiniyanci | Injiniyanci | Injiniyanci | Injiniyanci | Injiniyanci | Injiniyanci | Ciyar da Spindles | |
Bayani dalla-dalla
| Edgeworks | Lebur & Dinka |
| Jimlar Na'urar Dogayen Sanduna | 10 |
| Na'urar Siffar Gefen Ƙasa | 6 |
| Na'urar Siffar Zane ta Gaba | 2 |
| Na'urar Siffar Dinkin Baya | 2 |
| Tsarin Aiki na Mai Aiki na HMI Touch Panel | Ee |
| Kamfanin PLC | Eh, sarrafa goge sandunan gogewa & daidaita kauri gilashi, |
| Matsakaicin Nauyin Gilashi | 700 kg |
| Kauri Gilashi | 3 ~ 30 mm (zaɓi 40 mm) |
| Ƙaramin Girman Gilashi | 40 x 40 mm |
| Gudun Tafiya na Gilashi | 0.5 ~ 5.0 m/min. |
| Daidaita Gudun Tafiya na Gilashi | An tsara shi ta hanyar maɓalli tare da inverter mita |
| Daidaita Kauri na Gilashi | Shigarwa a cikin HMI wanda PLC ke sarrafawa yana sarrafa jigilar kaya ta gaba ta atomatik ta hanyar motar AC & encoder |
| Kushin Roba na Baya | Tauri |
| Adadin Cire Gilashi | Manual |
| Babban jigilar kaya | Bearings |
| Shigarwa/Mai fita | Belin Lokaci |
| Nika Spindles Ciyarwa | Injiniyanci |
| Goge Spindles Ciyarwa | Ciwon huhu |
| Tankin Ruwa | Ɗaya |
| Injin Famfon Ruwa | AC 0.25 KW |
| Iskar Matsawa | 8 MPa |
| Ƙarfi | 21.75 KW |
| Wutar lantarki | AC 380V / Mataki na 3 / 50Hz (wasu idan an buƙata) |
| Nauyi (kg) | 4500 kg |
| Girman waje | 8100(L) x 1200(W) x 2800(H) mm |
Nau'ikan samfura
-
GBF-4225 Gilashin Beveling Machine mai gefe huɗu
-
G-VFE-5M Tsaye Madaidaiciyar Layin Gilashi Beveling ...
-
Injin Beveling na Gilashi na gefe biyu na GBD-3025
-
G-VFE-9M-A Gilashin Gilashi Mai Tsaye Mai Layi Bevelin...
-
Tsaye Madaidaiciyar Layin Gilashi Flat Gefen Injin ...
-
G-VFE-9M Tsaye Madaidaiciyar Layin Gilashi Mai Zane ...