Masana'antar OEM ta China Injin Niƙa da Goge Gilashi Mai Layi Biyu na Gefen Biyu/Goge Injin Sarrafawa da Gogewa tare da Takaddun Shaidar Ce (Jfsz-4200)
Kayan aikinmu masu kyau da kuma kyakkyawan tsari a duk matakai na masana'antu suna ba mu damar tabbatar da gamsuwar mai siye ga OEM Factory for China 20 Glass Straight Line Double Edge/Edging Niƙa da gogewa Injin Sarrafawa tare da Ce Certificate (Jfsz-4200). Idan kuna da wani ra'ayi game da kamfaninmu ko kayanmu, da fatan za ku ji daɗi don kiran mu ba tare da ɓata lokaci ba, za a yi matuƙar godiya da wasiƙar da za ku aiko mana.
Kayan aikinmu masu kyau da inganci masu kyau suna gudana a duk matakai na masana'antu suna ba mu damar tabbatar da gamsuwar mai siye gaba ɗayaInjin Gilashin China, Injin GilashiMun kasance masu matuƙar alhakin duk cikakkun bayanai game da odar abokan cinikinmu komai ingancin garanti, farashi mai gamsarwa, isarwa cikin sauri, sadarwa akan lokaci, tattarawa mai gamsarwa, sharuɗɗan biyan kuɗi masu sauƙi, mafi kyawun sharuɗɗan jigilar kaya, sabis bayan tallace-tallace da sauransu. Muna ba da sabis na tsayawa ɗaya da mafi kyawun aminci ga kowane abokin cinikinmu. Muna aiki tuƙuru tare da abokan cinikinmu, abokan aiki, ma'aikata don samar da makoma mai kyau.
Fasaloli da ayyuka:
- Layin samarwa ya haɗa da sashin ɗaukar gilashi, sashin wanke-wanke da busarwa, sashin jigilar gilashi, sashin dubawa & haɗa sarari, sashin haɗa gilashi, sashin buga faranti, sashin fitarwa da teburin karkatarwa.
- Ta atomatik, ana iya rarrabe gefen shafi na gilashin da aka rufe da gilashin Low-E.
- Mai sarrafa PLC tare da aikin allon taɓawa.
- Yana amfani da haɗakar gilashin waje, wanda zai iya samar da daidaitaccen IGU mai matakai biyu da kuma na'urar gilashin da aka rufe da yadudduka uku.
- Sashen matse faranti yana amfani da na'urar gear da sarkar synchronous kuma tashar hydraulic ce ke tuƙa shi. Teburin matse faranti kuma ana iya buɗe shi don gyarawa.
- Duk layin yana ɗaukar na'urar canza mita don daidaita gudu, fitarwa 800 inji a kowane aiki.
- Latsawa ta cikin farantin zaɓi ne don samar da IGU mataki-mataki.
Sigar fasaha:
| Girman na'urar IG da aka sarrafa | Mafi ƙaranci: 300x450mm, Matsakaicin girma: 2500x3000mm, 2500x3500mm (tsawon naúrar, zaɓi ne) |
| Hanyoyin haɗawa | Taro na atomatik a waje, matsi na farantin ciki |
| Ƙarfi | Wayoyi 3-Mataki, 4, 380V 50Hz, 27kW |
| Amfani da iska | 600L/min |
| Saurin wankewa | 2-8m/min |
| Matsakaicin saurin aiki | 45m/min (ana iya daidaitawa bisa ga buƙata) |
| Kauri gilashi ɗaya: | 3-15 mm |
| Kauri naúrar gilashin rufewa | 12 ~ 50mm; |
| Iska mai matsewa | 0.5-1.0Mpa, 0.8m3/minti |
| Tsarin wutar lantarki na ruwa | ≦50μS/cm |
| Yanayin zafi na yanayi | 10℃-30℃, bayan DIN 40040 |
| Danshin iska mai alaƙa | ≦75%, bayan DIN 40040 |
| Girman gabaɗaya | 26050x2300x3400mm |
- Na baya :IGL-2510E-SD Layin samar da gilashi mai rufewa ta atomatik tare da robot mai rufewa
- Na gaba: Layin Samar da Gilashin Gilashi na IGL-2208E na Atomatik
