Injin Butyl Extruder na BEM-05D mai rufi na Gilashin Rukunin Kariya
Siffofi:
1. Injin Butyl Extruder na BEM-05D yana amfani da na'urar sarrafa PLC, yana da ƙarfi kuma yana adana kuzari tare da fasahar zamani.
2. Ana iya saita lokacin dumama na'urar cikin awanni 96, wanda zai guji dogon lokacin dumama yayin aiki.
3. Ana saita tsarin ƙararrawa lokacin da manne ya ƙare don haka mai aiki zai iya cike manne a kan lokaci.
4. Ana iya canza nisan bututun rufewa tsakanin 6-20mm gwargwadon faɗin da kauri daban-daban na na'urar rufe gilashin aluminum ko sandar spacer ƙarfe.
5. Jagorar ramin sarari na musamman na bakin karfe yana sa ya zama mai sauƙin aiki.
6. Ingantaccen tsari na musamman yana sauƙaƙa canza bel ɗin sufuri.
7. Ɗauki mai sarrafa saurin mita, saurin aiki yana daidaitawa.
Babban siga na fasaha:
| Tushen wutan lantarki | Mataki na 3, 380/415V 50Hz |
| Ƙarfin da aka ƙima | 4.0 Kw |
| Faɗin na'urar ɗiban aluminum | 6 ~ 20 mm |
| Gudun aiki | 21m/min |
| Matsi na fitar da kaya | 10~15Mpa |
| Matsin iska | 0.5~0.8Mpa |
| Zafin fitarwa | 110~160℃ |
| Girman gabaɗaya | 3000 x 650 x 1000mm |
Rubuta saƙonka a nan ka aika mana da shi
