Injin hako gilashi na GHD-V-NC
Jerin GHD-V injinan haƙa ramukan gilashi ne a tsaye. Injinan suna haƙa ramuka tare da gilashi a tsaye ta hanyar guntun haƙa na tsakiya. Yana da sauƙi ga sandunan haƙa rami su samo daga rami ɗaya zuwa rami na gaba lokacin da aka sanya gilashi a tsaye maimakon a kwance. Wannan ƙira tana taimakawa wajen haƙa ramuka da yawa akan guntu ɗaya na gilashi cikin sauri a ƙarancin aiki. Xinology yana ba da nau'ikan injin haƙa gilashi guda biyu a tsaye.
- Injin haƙa rami mai araha
- Maƙallan haƙowa biyu na gaba da baya
- Maƙallan haƙowa suna motsawa sama da ƙasa tare da gadar tsaye kawai ta hanyar danna maɓallin
- Motsin kwance na gilashi ta hanyar hannu
- Saurin juyawa na spindles wanda mai canza mita ke sarrafawa
- Sanyaya ruwa a tsakiyar injin haƙa rami
- Sauƙin aiki
- Tsarin mai sauƙi amma abin dogaro
Aiki
- Loda gilashin kuma motsa gilashin da hannu tare da layin tallafi har sai an yi rijistar matsayin ramin kwance
- Maɓallin dannawa don motsa spindles sama ko ƙasa har sai an yi rijistar matsayin ramin tsaye
- Juya ƙafafun hannu don ciyar da spindles da core haƙa, da kuma kusantar saman gilashi da hannu don duba matsayin ramin
- Idan masu haƙa ramin ba su daidaita da daidaita wurin ramin ba, daidaita wurin kwance na gilashi da kuma madaurin a tsaye har sai masu haƙa ramin sun daidaita da wurin ramin
- Maɓallin latsawa don kunna tallafin matsi na gilashi don riƙe gilashin a matsayi
- Za a yi aiki da sandunan baya da sandunan gaba a jere ta atomatik
Bayani dalla-dalla
| Lambar Maɓallin Hakowa | Biyu ɗaya (gaba da baya) |
| Kula da Lambobi na NC | Ee |
| Kamfanin PLC | Ee |
| Tsarin Aiki na Mai Aiki na HMI Touch Panel | Ee |
| Rawar soja ta baya Ciyar da sandar baya | Na atomatik |
| Ciyar da Dogayen Na'ura Mai Rarraba Gaba | Na atomatik |
| Rijistar Ramin Ramin Rami | Na atomatik |
| Matsakaicin Girman Gilashi | 5000 x 2500 mm |
| Ƙaramin Girman Gilashi | 500 x 500 mm |
| Nisa Tsaye Daga Gefen Gilashi na Ƙasa zuwa Gefen Rami | 80 ~ 2450 mm |
| Kauri Gilashi | 5 ~ 25 mm |
| Diamita na Gilashin Ramin Rami | Φ4 ~ Φ100 mm |
| Daidaiton Matsayi na Ramin Ramin Rami | ± 0.50 mm |
| Daidaiton Rage ... | ± 0.10 mm |
| Gudun Tafiya a Kwance a Gilashi | 0 ~ 5 m/min. (ta hanyar injin servo) |
| Gudun Tafiya Sama/Ƙasa | 0 ~ 4.2 m/min. (ta hanyar injin servo) |
| Gudun Juyawa na Spindles | An tsara ta hanyar na'urar canza mita |
| Rage Spindles Gaba / Ciyar da Baya | Ciwon huhu |
| Sanyaya Ruwa | Ruwa yana gudana a cikin babban ɓangaren dill |
| Amfani da Iskar Matsawa | 1 Lt/min. |
| Matsi na Iska | 0.6 ~ 0.8 MPa |
| Ƙarfi | 7.2 kW |
| Wutar lantarki | 380 V / Mataki na 3 / 50 Hz (wasu idan an buƙata) |
| Nauyi | 2000 kg |
| Girman waje | 8000(L) x 1200(W) x 3700(H) mm |
