Na'urar Cire Fim ɗin Cire Fim ɗin CNC Mai Rahusa Mai Ƙarfi ta FRM-2500
Siffofi:
1) Injin Cire Fim ɗin Cire Gilashi Mai Rahusa na FRM-2500 CNC Mai Rufi Mai Sauƙi ya ɗauki tsarin sarrafa CNC, saitin sigogi yana da sauƙi kuma mai sauri.
2) Tsarin aikin allon taɓawa, yana sa ido kan yanayin aikin injin ta atomatik.
3) Motocin servo masu axis 4 suna tabbatar da daidaiton matsayi.
4) Hanyar aiki tana da sauƙin saitawa bisa ga buƙata.
5) Gwada girman gilashin ta atomatik, babu buƙatar canza ƙafa don cire fim ɗin da bai yi daidai ba.
6) Hanyar aiki ta ƙafafun kwance na iya rage saka ƙafafun.
7) Na'urar zamiya mai layi tana ba da damar samun sakamako mai kyau na cire fim.
8) Daidaita matsin lamba na motsi na ƙafafun ta atomatik, cimma kyakkyawan cire fim.
9) A tantance gefen murfin gilashin da aka rufe da gilashin Low-E ta atomatik. Inji ne mai mahimmanci don samar da na'urar rufe gilashin mataki na farko.
Babban siga na fasaha:
| Tushen wutan lantarki: | Mataki na uku 380/415V 50Hz |
| Matsakaicin girman gilashi | 2500x3000mm |
| Ƙaramin girman gilashi | 300x600mm |
| Asarar Tayar | 5000 ~ 6000m/inji, faɗin cire fim 15mm |
| Gudun juyawar dabaran | Tukin inverter 0 ~ 2700 rpm |
| Tsawon na'urar ɗaukar gilashi | 450+/-50mm |
| kauri gilashi | 3 ~ 19mm |
| faɗin cire fim | 10~150mm |
| Cire saurin | 0~30m/min (wanda za a iya daidaitawa) |
| Daidaito | +/- 0.3mm |
| Matsin iska | 0.6~0.8MPa |
| Girman gabaɗaya | 8200x1800x3500mm |
