Layin Samar da Gilashin Rufe Gilashi na IGL-2208E na Atomatik
Fasaloli da ayyuka:
1. Layin samar da gilashin rufewa ta atomatik wanda ya haɗa da sashin ɗaukar gilashi, injin wanke-wanke da busar da gilashi, sashen jigilar gilashi, duba ingancin wanke-wanke da kuma sashin haɗa gilashin aluminum spacer, sashin haɗa gilashin, sashin haɗa gilashin, sashin fitar da gilashin dgu da aka finshed da kuma teburin sauke gilashin da aka karkatar.
2. Cikakken yana bambanta gefen murfin gilashin da aka rufe da gilashin Low-E ta atomatik.
3. Mai sarrafa PLC tare da aikin allon taɓawa.
4. Yana amfani da kayan haɗin gilashi na waje, wanda zai iya samar da daidaitaccen IGU mai matakai biyu da kuma na'urar gilashin da aka rufe da yadudduka uku.
5. Sashen matse farantin ya ɗauki kayan aiki na gear da sarka kuma tashar hydraulic ce ke tuƙa shi. Teburin matse farantin kuma ana iya buɗe shi don gyarawa.
6. Duk layin ya ɗauki na'urar sauya mita don daidaita gudu, fitar da guda 800 a kowane aiki.
7. Matsi na ciki na farantin zaɓi ne don samar da IGU na mataki-mataki.
Sigar fasaha:
| Girman na'urar IG da aka sarrafa | Mafi ƙaranci: 300x450mm, Mafi girma: 2200x3000mm, |
| Hanyoyin haɗawa | Taro na atomatik a waje, matsi na farantin ciki |
| Ƙarfi | Wayoyi 3-Mataki, 4, 380V 50Hz, 27kW |
| Amfani da iska | 600L/min |
| Saurin wankewa | 2-8m/min |
| Matsakaicin saurin aiki | 45m/min (ana iya daidaitawa bisa ga buƙata) |
| Kauri gilashi ɗaya: | 3-15 mm |
| Kauri naúrar gilashin rufewa | 12 ~ 50mm; |
| Iska mai matsewa | 0.5-1.0Mpa, 0.8m3/minti |
| Tsarin wutar lantarki na ruwa | ≦50μS/cm |
| Yanayin zafi na yanayi | 10℃-30℃, bayan DIN 40040 |
| Danshin iska mai alaƙa | ≦75%, bayan DIN 40040 |
| Girman gabaɗaya | 26050x2300x3200mm |
